Steam Locomotive
Steam Locomotive
Price: $9.95


A makeCNC original 3D puzzle

This is a New Premium Pattern!

This is a Very Amazing Puzzle with some Finely detailed work in it! 

This is another one of makeCNC's Wonderful Models!


Ready to cut downloadable Patterns and Projects for your CNC Router, Milling Machine, Plasma Cutter or Laser Machine and Scroll Saw in both Imperial Inch format as well as Metric size for the Global CNC Hobbyist.

Files include a Full Color Assembly Manual Copyright makeCNC!

Buy one: Collect them All!  Impress your friends and family or make some extra cash with your CNC machine with your own product line at flea markets and craft shows!

Please Note: If you have any issues with your download or miss the red download button available after checkout Email us

NEW Steam Locomotive!!!

Steam Locomotive 1

(Exclusive to makeCNC


New Steam Locomotive

A steam locomotive is a railway locomotive that produces its pulling power through 
a steam engine. These locomotives are fueled by burning combustible material, 
usually coal, wood or oil, to produce steam in a boiler, which drives the steam 
engine. Both fuel and water supplies are carried with the locomotive, either on the 
locomotive itself or in wagons or tenders pulled behind.
Steam locomotives were first developed in Great Britain during the early 19th 
century and dominated railway transport until the middle of the 20th century. From 
the early 1900s they were gradually superseded by electric and diesel locomotives.
In 1837 the first steam railway started in Austria on the Emperor Ferdinand 
Northern Railway between Vienna-Floridsdorf and Deutsch-Wagram. The oldest 
continually working steam engine in the world also runs in Austria. The GKB 671 
built in 1860, has never been taken out of service, and is still used for special 
The steam generated in the boiler fills the steam space above the water in the 
partially filled boiler. Its maximum working pressure is limited by spring-loaded 
safety valves. It is then collected either in a perforated tube fitted above the 
water level or from a dome that often houses the regulator valve, or throttle, the 
purpose of which is to control the amount of steam leaving the boiler. The steam 
then either travels directly along and down a steam pipe to the engine unit or may 
first pass into the wet header of a superheater, the role of the latter being to 
improve thermal efficiency and eliminate water droplets suspended in the "saturated 
steam", the state in which it leaves the boiler. On leaving the superheater, the steam exits
the dry header of the superheater and passing down a steam pipe 
entering the steam chests adjacent to the cylinders of a reciprocating engine. 
Inside each steam chest is a sliding valve that distributes the steam via ports 
that connect the steam chest to the ends of the cylinder space. The role of the 
valves is twofold: admission of each fresh dose of steam and exhaust of the used 
steam once it has done its work.

The Steam Locomotive

steam Locomotive 2

Hello and thanks for shopping with Makecnc!
These 3d puzzles are a downloadable product that have been made ready to cut on any CNC router or CNC laser machine.
They are supplied as ready-to-cut DXF vector files for CNC routers and EPS for CNC lasers machines.

Patterns may be scaled to the size you require for your material thickness using our Scale Calculator

CNC Routers Users ! Please See our Tutorial for information on dealing with Inside Corners and Dogbone Fillets

Each Zip File Includes:

2 or 4 CDR Files - Sizes you receive Depend on individual Product - usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions (Corel Draw Format for Laser)
2 or 4 DXF's - Sizes you receive Depend on individual Product -  usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions (For Most CAD Programs)
2 or 4 SVG - Sizes you receive Depend on individual Product - usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions  (Opens in Many CAD & Drawing Programs) 

Printable PDF Pattern  (For Scroll Saw Use)

1 X  Clear and Concise Color Assembly Manual.

1 X  Number Guide DXF (Also called Coded DXF - NOT in all Products - Only in Certain Products)

1 x Readme File and Copyright Information

1 X Product Notes -  Letting you know an Approximate Height, Length and Width of your finished product and giving the Approximate Size of the Largest Part.  These Approximations are given in Imperial and Metric. Remember, These are Approximate Sizes. 

Approximate Size at 6mm

L= 381
W = 64
H = 152
Approximate Size at 1/4 inch
L = 15 
W = 2.5
H = 6
Approximate Size of Largest Part
18 X 2.5 inches
457 X 64 mm
Approximate Part Number: 151

steam Locomotive 3

NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8" uses 1/8" Plywood...1/4" uses 1/4" Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting.

All the hard work is done!

Makecnc is excited to bring to the CNC hobbyist a new and ever-expanding library of art and projects made ready-to-cut on your CNC machine!

You can either sell the cut out projects as your own product or assemble them for your own enjoyment and to give as gifts to your family and friends.

When you purchase a makeCNC pattern you are agreeing to our Copyright Terms. Please Click on the Link Below to View them! Thank You!