Passenger Car
Passenger Car
Price: $9.95


passenger car1

NEW Passenger Car!!!

This is a New Premium Pattern!

(Exclusive to makeCNC

passenger car 2

New Passenger Car

A passenger car known as a coach or carriage in the UK, and also known as a bogie 
in India, is a piece of railway rolling stock that is designed to carry passengers. 
The term passenger car can also be associated with a sleeping car, baggage, dining, 
railway post office and prisoner transport cars.
Up until about the end of the 19th century, most passenger cars were constructed of 
wood. The first passenger trains did not travel very far, but they were able to 
haul many more passengers for a longer distance than any wagons pulled by horses.
As railways were first constructed in England, so too were the first passenger 
cars. One of the early coach designs was the "Stanhope". It featured a roof and 
small holes in the floor for drainage when it rained, and had separate compartments 
for different classes of travel. The only problem with this design is that the 
passengers were expected to stand for their entire trip. The first passenger cars 
in the United States resembled stagecoaches. They were short, often less than 10 ft 
long and had two axles.
British railways had a little bit of a head start on American railroads, with the 
first "bed-carriage" (an early sleeping car) being built there as early as 1838 for 
use on the London and Birmingham Railway and the Grand Junction Railway. Britain's 
early sleepers, when made up for sleeping, extended the foot of the bed into a boot 
section at the end of the carriage. The cars were still too short to allow more 
than two or three beds to be positioned end to end.


The Passenger Car

The Passenger Car comes with a multi-page color assembly guide using photographic quality rendering and assembly images.

This model comes in 1/4", 1/8" and 1/2" and 1/16"  scales with 1/16" being the smallest.

It also comes in 1.5 mm, 3mm, 6mm and 12mm sizes and two fully different scales sets for smaller or larger Routers or Lasers.
We have created the files as Laser ready meaning they do not have any dogbone fillets in the slots and tabs
but you also get a set of files with all the dogbone fillets in them so they are ready to toolpath and cut on your CNC router.

It is recommended that you use a Laser Machine to enhance the detail for this pattern.

However, you can use whatever method you choose to complete your project.

That's many different file types scales and formats for this Passenger Car Pattern!
All makeCNC Premium Products come in this format for the highest quality CNC projects on the market today!

passenger car 3



The Passenger Car Pattern and its instruction guide, its design and assembly methods are all Copyright makeCNC. If you purchase this pattern and would like to reproduce it you may only reproduce up to 50 real products from the individual  pattern. If you would like to reproduce more than 50 then you would need to purchase another Passenger Car Pattern at $9.95 again. You could then produce another 50 real products. You would have to purchase a new pattern for every 50 you would like to produce. Otherwise, if you wish to mass produce this product please contact us at makeCNC to negotiate a commercial license.

Thank You!