Horses & Cart
Horses & Cart Discounts Applied to Prices at Checkout!
10% off this product on orders over $50
Price: $5.00
Quantity:
:

ON SALE NOW!
 

 Horses & Cart

This Puzzle is included in Volume Seven

All puzzles on this volume now have not only Laser versions but we

have added a Router version as well. The Router versions have Dog
Bone Fillets to compensate for the cutter used that do not allow
sharp internal corners. Please see our learning pages if you are
unfamiliar with Dog Bone Fillets in CNC Routing. Scrollsaw users
would use the Laser versions.


PLEASE NOTE : ALL DOWNLOADABLE PRODUCTS ARE AVAILABLE INSTANTLY AFTER PAYMENT!

Please Note: If you have any issues with your download or miss the red download button available after checkout Email us

Horses and Cart
 
A horse-drawn vehicle is a mechanized piece of equipment pulled by one horse or by a team of horses. These vehicles typically had two or four wheels and were used to carry passengers and/or a load. They were once common worldwide, but they have mostly been replaced by automobiles and other forms of self-propelled transport.
A two-wheeled horse-drawn vehicle is a cart. Four-wheeled vehicles have many names – one for heavy loads is most commonly called a wagon.
Very light carts and wagons can also be pulled by donkeys much smaller than horses, ponies or mules. Other smaller animals are occasionally used, such as large dogs, llamas and goats.
Heavy wagons, carts and agricultural implements can also be pulled by other large draught animals such as oxen, water buffalo, yaks or even camels and elephants.
Vehicles pulled by one animal, or by animals in tandem – single file, have two shafts which attach either side of the rearmost animal. Vehicles pulled by a pair or by a team of several pairs have a pole which attaches between the wheel pair. Other arrangements are also possible, for example three or more abreast, a wheel pair with a single lead animal, a "unicorn", or a wheel pair with three lead animals abreast, a "pickaxe". Very heavy loads sometimes had an additional team behind to slow the vehicle down steep hills. Sometimes at a steep hill with frequent traffic such a team would be hired to passing wagons to help them up or down the hill.

 

Two-wheeled vehicles are balanced by the distribution of weight of the load over the axle, and then held level by the animal. This means that the shafts or sometimes a pole for two animals must be fixed rigidly to the vehicle's body. Four-wheeled vehicles remain level on their own, and so the shafts or pole are hinged vertically, allowing them to rise and fall with the movement of the animals. A four-wheeled vehicle is also steered by the shafts or pole, which are attached to the front axle. This swivels on a turntable or "fifth wheel" beneath the vehicle.

Collect your Horses & Cart Today!

Hello and thanks for shopping with Makecnc!
These 3D puzzles are a downloadable product that have been made ready to cut on any CNC router or CNC laser machine.
They are supplied as ready-to-cut DXF vector files for CNC.
CNC hobbyists receive excellent value for money with each package containing the following:

Imperial:

1/8 inch
1/4 inch
1/2 inch

Metric:

3mm
6mm
12mm

both in DXF format
1 X Clear and concise color assembly manual.

NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8" uses 1/8" Plywood...1/4" uses 1/4" Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting.

All the hard work is done!
Makecnc is excited to bring to the CNC hobbyist a new and ever-expanding library of art and projects made ready-to-cut on your CNC machine! You can either sell the cut out projects as your own product or assemble them for your own enjoyment and to give as gifts to your family and friends.

PLEASE READ COPYRIGHT

All downloadable products are copyright makecnc.com and may not be copied or redistributed in any format other than actual material products made from the supplied files.
Assembly PDF files may be sold as printed copies only along with a product made from the supplied files.

Unless otherwise stated in the documentation and product description you may make as many hard products as you like from your files with no royalty to the designer.