Deskproto lite 3 axis CAM software
Deskproto lite 3 axis CAM software
Price: $199.95
Quantity:
DeskProto Entry edition: the Lowcost version.
3D CAM at an unbelievable low price.
 
The DeskProto Entry Edition offers all toolpath types that are needed to use your CNC milling machine:
 3D machining of the geometry in an STL file.
 2D machining of the drawing in a DXF file.
 Bitmap machining of the picture in a bitmap file (GIF, JPG, BMP).
 

PLEASE NOTE: if you are a hobby user then your best software purchase option is the full Multi axis version of Deskproto available on ouir site. It has all the features of the full comercial 5 axis version but you must not use the software in a comercial environment.

We send your information in to have a license file generated for you. We will email that to you as soon as we’ve received it, which usually takes 24 to 48 hours or less. Meanwhile, you can use the program in Demo mode while you wait for your license file. 

You can acess the Deskproto you Tube channel for a world of information on this amazing software at the link below.

But please remember to come back to makeccnc.com when its time to purchase and we will add five standard pattern projetcs of your choice to the deal .You won't find this exclusive offer anywhere else online !!!

http://www.youtube.com/user/LexLennings/videos

 
Functionality in the DeskProto Entry Edition
 
The DeskProto Entry Edition is in fact the same program as the other two editions, however without the advanced parameters meant for the more experienced users. So the number of available options has been reduced for the Entry edition, all other functionality is identical for the Entry and Expert editions. In order to compare the three editions you can use the comparison table.
 
 The following settings are available in DeskProto Entry:
 Scale, Mirror and Rotate the geometry
 Set a bottom level (the minimum Z-value to be machined).
 Define and select cutters
 Distance between the parallel toolpaths, and stepsize along the toolpath
 Speeds: feedrate and spindle speed
 Roughing options: skin thickness and layer height
 Simple 2D machining
 Bitmap machining (grey-value to Z-Height conversion)
 
 And, in addition to calculating toolpahts, the following options:
 Simulate the 3D toolpath
 Estimate the machining time
 Choose a user-interface: wizard or dialog-based,
or create a project with the wizard and then fine-tune using the dialogs
 Freely add machine-definitions
 Configure your own postprocessor (if needed).