Dake Piston Engine - Engine Series
Dake Piston Engine - Engine Series
Price: $12.95

Dake Piston Engine

A makeCNC Original 3D Puzzle

This is Not a Beginners Pattern!!!  This is a Great Pattern that will provide Challenging Fun! 


Ready to cut downloadable Patterns and Projects for your CNC Router, Milling Machine, Plasma Cutter or Laser Machine and Scroll Saw in both Imperial Inch format as well as Metric size for the Global CNC Hobbyist.

Files include a Full Color Assembly Manual Copyright makeCNC!

Buy one: Collect them All!  Impress your friends and family or make some extra cash with your CNC machine with your own product line at flea markets and craft shows!

Please Note: If you have any issues with your download or miss the red download button available after checkout Email us

Dake Piston Engine
The Dake Engine is a square piston engine. There are basically only 3 moving 
parts, the square outer piston, the somewhat round inner piston and the crank 
shaft. The internal piston parts are about 1 inch thick. The engine is very well 
balanced and therefore takes little effort to drive it.
A reciprocating engine, also often known as a piston engine, is a heat engine 
usually, although there are also pneumatic and hydraulic reciprocating engines 
that uses one or more reciprocating pistons to convert pressure into a rotating 
motion. This article describes the common features of all types. The main types 
are: the internal combustion engine, used extensively in motor vehicles; the 
steam engine, the mainstay of the Industrial Revolution; and the niche 
application Stirling engine. Internal Combustion engines are further classified 
in two ways: either a spark-ignition engine, where the spark plug initiates the 
combustion; or a compression-ignition engine, where the air within the cylinder 
is compressed, thus heating it, so that the heated air ignites fuel that is 
injected then or earlier.
Collect your Detailed & Very Impressive Engine Pattern today! It's definitely a Must Have for Your Collection!

(Exclusive to makeCNC

Hello and thanks for shopping with Makecnc!
These 3d puzzles are a downloadable product that have been made ready to cut on any CNC router or CNC laser machine.
They are supplied as ready-to-cut DXF vector files for CNC routers and EPS for CNC lasers machines.

Patterns may be scaled to the size you require for your material thickness using our Scale Calculator

CNC Routers Users ! Please See our Tutorial for information on dealing with Inside Corners and Dogbone Fillets

Each Zip File Includes:

2 or 4 CDR Files - Sizes you receive Depend on individual Product - usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions (Corel Draw Format for Laser)
2 or 4 DXF's - Sizes you receive Depend on individual Product -  usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions (For Most CAD Programs)
2 or 4 SVG - Sizes you receive Depend on individual Product - usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions  (Opens in Many CAD & Drawing Programs) 

Printable PDF Pattern  (For Scroll Saw Use)

1 X  Clear and Concise Color Assembly Manual.

1 X  Number Guide DXF (Also called Coded DXF - NOT in all Products - Only in Certain Products)

1 x Readme File and Copyright Information

1 X Product Notes -  Letting you know an Approximate Height, Length and Width of your finished product and giving the Approximate Size of the Largest Part.  These Approximations are given in Imperial and Metric. Remember, These are Approximate Sizes. 

Approximate Size at 3mm
L= 254
W = 133
H = 203
Approximate Size at 1/8 inch
L = 10
W = 5.2
H = 8
Approximate Size of Largest Part
10 X 5.2 inches
254 X 133 mm
Approximate Part Number: 72
NOTE: Our 3D Puzzles can be built in different thicknesses.

Example: 1/8" uses 1/8" Plywood...1/4" uses 1/4" Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting.

All the hard work is done!

Makecnc is excited to bring to the CNC hobbyist a new and ever-expanding library of art and projects made ready-to-cut on your CNC machine!

You can either sell the cut out projects as your own product or assemble them for your own enjoyment and to give as gifts to your family and friends.

When you purchase a makeCNC pattern you are agreeing to our Copyright Terms. Please Click on the Link Below to View them! Thank You!