Albatros DV Plane
Albatros DV Plane
Price: $6.00
Quantity:

On Sale Now!

Albatros DV Plane

A makeCNC original 3D puzzle

This is a Very Amazing Puzzle with some Finely detailed work in it! 

This is another one of makeCNC's Wonderful Models!

ALL DOWNLOADABLE PRODUCTS ARE AVAILABLE INSTANTLY AFTER PAYMENT!

Ready to cut downloadable Patterns and Projects for your CNC Router, Milling Machine, Plasma Cutter or Laser Machine and Scroll Saw in both Imperial Inch format as well as Metric size for the Global CNC Hobbyist.

Files include a Full Color Assembly Manual Copyright makeCNC!

Buy one: Collect them All!  Impress your friends and family or make some extra cash with your CNC machine with your own product line at flea markets and craft shows!


Please Note: If you have any issues with your download or miss the red download button available after checkout Email us


Albatros DV Plane

The Albatros D.V was a fighter aircraft used by the Luftstreitkräfte Imperial German Air Service during World War I. The D.V was the final development of the Albatros D.I family, and the last Albatros fighter to see operational service. Despite its well-known shortcomings and general obsolescence, approximately 900 D.V and 1,612 D.Va aircraft were built before production halted in early 1918. The D.Va continued in operational service until the end of the war.
Albatros responded with the D.Va, which featured stronger wing spars, heavier wing ribs, and a reinforced fuselage. These modifications made the D.Va 50 pounds heavier than the D.III, while failing to cure entirely the structural problems of the type. Use of the high-compression 130 kW (180 hp) Mercedes D.IIIaü engine offset the increased weight of the D.Va. The D.Va also reverted to the D.III's aileron cable linkage, running outwards through the lower wing, then upwards to the ailerons, to provide a more positive control response. The wings of the D.III and D.Va were in fact interchangeable. The D.Va was also fitted with a small diagonal brace connecting the lower section of the forward interplane strut to the leading edge of the lower wing. This brace was retrofitted to some D.V aircraft.
The D.V closely resembled the D.III and used the same 127 kW (170 hp) Mercedes D.IIIa engine. The most notable difference was a new fuselage which was 70 pounds lighter than that of the D.III. The elliptical cross-section required an additional longeron on each side of the fuselage. The vertical fin and tailplane remained unchanged from the D.III. The prototype D.V retained the standard rudder of the Johannisthal-built D.III, but production examples used the enlarged rudder featured on D.IIIs built by Ostdeutsche Albatros Werke. The D.V also featured a larger spinner and ventral fin.

Collect your Wonderful makeCNC 3D Puzzle Project today! It's definately a Must!

Hello and thanks for shopping with Makecnc!
These 3d puzzles are a downloadable product that have been made ready to cut on any CNC router or CNC laser machine.
They are supplied as ready-to-cut DXF vector files for CNC routers and EPS for CNC lasers machines.

Patterns may be scaled to the size you require for your material thickness using our Scale Calculator

CNC Routers Users ! Please See our Tutorial for information on dealing with Inside Corners and Dogbone Fillets

Each Zip File Includes:

2 or 4 CDR Files - Sizes you receive Depend on individual Product - usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions (Corel Draw Format for Laser)
 
2 or 4 DXF's - Sizes you receive Depend on individual Product -  usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions (For Most CAD Programs)
 
2 or 4 SVG - Sizes you receive Depend on individual Product - usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions  (Opens in Many CAD & Drawing Programs) 

Printable PDF Pattern  (For Scroll Saw Use)

1 X  Clear and Concise Color Assembly Manual.

1 X  Number Guide DXF (Also called Coded DXF - NOT in all Products - Only in Certain Products)

1 x Readme File and Copyright Information

1 X Product Notes -  Letting you know an Approximate Height, Length and Width of your finished product and giving the Approximate Size of the Largest Part.  These Approximations are given in Imperial and Metric. Remember, These are Approximate Sizes. 

Approximate Size at 3mm

L= 241
W = 305
H = 127
 
 
Approximate Size at 1/8 inch
L = 9.5
W = 12
H = 5
 
Approximate Size of Largest Part
12 X 3 inches
305 X 76 mm


NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8" uses 1/8" Plywood...1/4" uses 1/4" Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting.

All the hard work is done!

Makecnc is excited to bring to the CNC hobbyist a new and ever-expanding library of art and projects made ready-to-cut on your CNC machine!

You can either sell the cut out projects as your own product or assemble them for your own enjoyment and to give as gifts to your family and friends.

When you purchase a makeCNC pattern you are agreeing to our Copyright Terms. Please Click on the Link Below to View them! Thank You!

PLEASE READ:  Here: COPYRIGHT TERMS