WW Collets - 3/4", 1", 1 1/4" 10mm Collets - 3/4", 1", 1 1/4"

A T-rest is used by watchmakers to support a handheld cutting tool called a "graver".

Now you can increase your ability to see exactly what you are doing when making very small, precise cuts on the lathe.

The Mount includes:
-Mount with billet aluminum base and solid steel column
-Mounting screws and T-nuts
-Improved pivot joint for light source to replace the one included with the microscope
-O-ring to secure light source in mount

Microscope with Mill Mount

Microscope Mill Mount

The radius cutting attachment swings a tool through an arc to put a radius on the end of a part.
The pivot points and tool position are adjustable, so it is capable of cutting either a concave or convex shape in a large range of sizes.

If you find your jobs require a lot of tool changes, this timesaving accessory will make your projects that much more of a pleasure.

This 1.25" riser base brings the cutting tool up to the proper height when the headstock riser block is used on the lathe.

80° Carbide inserts have a strong shape that is generally used for roughing a part to near finished size quickly. (RH)

80° Carbide inserts have a strong shape that is generally used for roughing a part to near finished size quickly. (LH)