Ferry Wheel Barrow - Wheel Barrow
Ferry Wheel Barrow - Wheel Barrow Discounts Applied to Prices at Checkout!
10% off this product on orders over $50
Price: $4.95
Quantity:
 On Sale Now!

Ferry Wheel Barrow

A makeCNC Original 3D Puzzle

This is a Great Pattern that will provide Lots of Fun!

A wheelbarrow is a small hand-propelled vehicle, usually with just one wheel, designed to be pushed and guided by a single person using two handles at the rear, or by a sail to push the ancient wheelbarrow by wind. The term "wheelbarrow" is made of two words: "wheel" and "barrow." "Barrow" is a derivation of the Old English "bearwe" which was a device used for carrying loads.
The wheelbarrow is designed to distribute the weight of its load between the wheel and the operator so enabling the convenient carriage of heavier and bulkier loads than would be possible were the weight carried entirely by the operator. As such it is a second-class lever. Traditional Chinese wheelbarrows, however, had a central wheel supporting the whole load. Use of wheelbarrows is common in the construction industry and in gardening. Typical capacity is approximately 100 liters of material.
A two-wheel type is more stable on level ground, while the almost universal one-wheel type has better maneuverability in small spaces, on planks or when tilted ground would throw the load off balance. The use of one wheel also permits greater control of the deposition of the load on emptying.
You will have Lots of Fun making these Very Cool & Decorative Wheel Barrows!!!
 
Comes with a Multi Page Full Color Assembly Guide!
 
Important Note: Please Read Before Purchase!!!

Disclaimer:  By buying these plans and building them as you want and see fit we here at makeCNC will Not be held liable for any damages, loss or accidents etc. caused from the way you build or assemble this pattern. You are responsible for the way you build and assemble the plans. You are reponsible for the materials, glues, reinforcements etc. that you use to assemble and use this puzzle pattern. makeCNC only provides you with the plans to guide you in how you would cut the basics out. You must do the rest! You are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project and make sure you use the appropriate materials, bolts, reinforcements, wood or whatever you wish to use that will provide you with the best strength and safety for your finished project.

You are responsible for assembling it to be strong and reinforced for safety. Remember, Safety First!!! 

(Exclusive to makeCNC

Patterns may be scaled to the size you require for your material thickness using our Scale Calculator

CNC Routers Users ! Please See our Tutorial for information on dealing with Inside Corners and Dogbone Fillets

Each Zip File Includes:

2 or 4 CDR Files - Sizes you receive Depend on individual Product - usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions (Corel Draw Format for Laser)
 
2 or 4 DXF's - Sizes you receive Depend on individual Product -  usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions (For Most CAD Programs)
 
2 or 4 SVG - Sizes you receive Depend on individual Product - usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions  (Opens in Many CAD & Drawing Programs) 

Printable PDF Pattern  (For Scroll Saw Use)

1 X  Clear and Concise Color Assembly Manual.

1 X  Number Guide DXF (Also called Coded DXF - NOT in all Products - Only in Certain Products)

1 x Readme File and Copyright Information

1 X Product Notes -  Letting you know an Approximate Height, Length and Width of your finished product and giving the Approximate Size of the Largest Part.  These Approximations are given in Imperial and Metric. Remember, These are Approximate Sizes.

Approximate Size at 6mm
L= 915
W = 305
H = 381
 
 
Approximate Size at 1/4 inch
L = 36
W = 12
H = 15
 
Approximate Largest Part
36 X 15 inches
915 X 381  mm
 
Approximate Part Number: 9
 

NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8" uses 1/8" Plywood...1/4" uses 1/4" Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting.

All the hard work is done!

Makecnc is excited to bring to the CNC hobbyist a new and ever-expanding library of art and projects made ready-to-cut on your CNC machine!

You can either sell the cut out projects as your own product or assemble them for your own enjoyment and to give as gifts to your family and friends.

When you purchase a makeCNC pattern you are agreeing to our Copyright Terms. Please Click on the Link Below to View them! Thank You!

PLEASE READ:  Here: COPYRIGHT TERMS